Grandstream Networks UCM6510 User Manual

P a g e | 125
UCM6510 IP PBX User Manual
Version 1.0.20.31
Once added, the option will be shown in the list below. On the left side of each option, users can click
on to remove this option from the model template. On the right side of each option, users can click
on to reset the option to the default value.
Figure 67: Edit Model Template
User could also click on “Add New Field” to add a P value number and the value to the configuration. The
following figure shows setting P value “P1362” to “en”, which means the display language on the LCD is
set to English. For P value information of different models, please refer to configuration template here
http://www.grandstream.com/sites/default/files/Resources/config-template.zip.
Note: Some devices use Alias and not P-values.
 Click on Save when done. The model template will be displayed on Web GUIValue-added
FeaturesZero ConfigModel Templates page.
 Click on to delete the model template or click on “Delete Selected Templates” to delete multiple
selected templates at once.
 Click on “Toggle Selected Template(s)” to toggle the status between enabled/disabled for the selected
model templates.

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English