P a g e | 163
UCM6510 IP PBX User Manual
Version 1.0.20.31
user, the Fax will be sent to the default Email address configured in
Fax setting page under Web GUICall FeaturesFax/T.38.
This option controls how the extension can be used on devices within
diverse types of network.
Allow All
Device in any network can register this extension.
Local Network Address
Only IP addresses in the configured network segments can register to
this extension.
If enable “All”, users do not need to enter password when making an
outbound call. If enable “Follow Me”, the call can dial out via follow me
without password.
Select audio and video codec for the extension. The available codecs are:
PCMU, PCMA, GSM, AAL2-G.726-32, G.722, G.729, G.723, ILBC,
ADPCM, LPC10, H.264, H.265, H.263 and H.263p.
Batch Extension Resetting Functionality
To reset multiple extensions to default settings, select the extensions on the main
Extension/TrunkExtensions page and click on the Reset button. Once reset, all settings except for
Concurrent Registrations will be reverted to default. User voicemail password will be randomized again,
and user voicemail prompts and recordings will be deleted. The settings for the extension user in the User
Management page will also be reverted to default except for usernames and custom privileges.
Search and Edit Extension
All the UCM6510 extensions are listed under Web GUIExtension/TrunkExtensions, with status,
Extension, CallerID Name, Technology (SIP, IAX and FXS), IP and Port. Each extension has a checkbox
for users to “Edit Selected Extensions” or “Delete Selected Extensions”. Also, options “Edit” , “Reboot”
, “Delete” and reset are available per extension. User can search an extension by specifying the
extension number to find an extension quickly.
To Next Page
Loading...
Need help?
General
