Grandstream Networks UCM6510 User Manual

P a g e | 162
UCM6510 IP PBX User Manual
Version 1.0.20.31
 Enter a password to be used on all the extensions in the batch.
Voicemail Password
Configure the password to access the extension's voicemail. A randomly
generated password is used by default and is highly recommended for
security. Only digits are supported.
Ring Timeout
Configure the number of seconds to ring the user before the call is
forwarded to voicemail (voicemail is enabled) or hang up (voicemail is
disabled). If not specified, the default ring timeout is 60 seconds on the
UCM6510, which can be configured in the global ring timeout setting under
Web GUIPBX SettingsGeneral Settings: General Preference.
The valid range is between 5 seconds and 600 seconds.
Note: If the end point also has a ring timeout configured, the actual ring
timeout used is the shortest time set by either device.
Auto Record
Enable automatic recording for the calls using this extension. The default
setting is disabled. The recording files can be accessed under Web
GUICDRRecording Files.
Skip Voicemail Password
Verification
If enabled, users can skip password verification when dialing in via the My
Voicemail feature code. This option is disabled by default.
Music On Hold
Select which Music On Hold playlist to suggest to extensions when putting
them on hold.
Call Duration Limit
Configure the maximum duration of call-blocking.
Enable LDAP
If enabled, the batch added extensions will be added to LDAP Phonebook
PBX list; if disabled, the batch added extensions will be skipped when
creating LDAP Phonebook.
IAX Settings
Max Number of Calls
Configure the maximum number of calls allowed for each remote IP
address.
Require Call Token
Configure to enable/disable requiring call token. If set to “Auto”, it might
lock out users who depend on backward compatibility when peer
authentication credentials are shared between physical endpoints. The
default setting is “Yes”.
Other Settings
SRTP
Enable SRTP for the call. The default setting is “No”.
Fax Mode
Select Fax Mode for this user. The default setting is “None”.
 None: Disable Fax.
 Fax Detect: Fax signal from the user/trunk during the call can be
detected and the received Fax will be sent to the Email address
configured for this extension. If no Email address can be found for the

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English