Grandstream Networks UCM6510 - Contact Group Configurations; Conference Recordings; Table 75: Contact Group Parameters; Figure 147: Conference Recording

P a g e | 256
UCM6510 IP PBX User Manual
Version 1.0.20.31
Contact Group Configurations
 Click on "Create New Contact Group" to add a new Contact Group.
 Click on to edit the Contact Group.
 Click on to delete the Contact Group.
Table 75: Contact Group Parameters
Name
Name associated to the contact group.
Password
Password required to invite the specified contact group to a conference.
Prompt
Audio file that can be uploaded to the group to announce the contact group
name such as “Sales” or “Marketing”.
The default announcement for each group is “Conference Contact Group
1”, “Conference Contact Group 2”, etc.
Members
Contacts that needs to be added in each group.
Type
Type of the members to be added, it can be either Extensions or a self-
defined number.
Conference Recordings
The UCM6510 allows users to record the conference call and retrieve the recording from Web GUICall
FeaturesConference.
To record the conference call, when the conference room is in idle, enable "Record Conference" from the
conference room configuration dialog. Save the setting and apply the change. When the conference call
starts, the call will be automatically recorded in .wav format.
The recording files will be listed as below once available. Users could click on to download the
recording or click on to delete the recording.
Figure 147: Conference Recording