Grandstream Networks UCM6510 User Manual

P a g e | 315
UCM6510 IP PBX User Manual
Version 1.0.20.31
PICKUP GROUPS
The UCM6510 supports pickup group feature which allows users to pick up incoming calls for other
extensions if they are in the same pickup group, by dialing "Pickup Extension" feature code (by default *8).
Configure Pickup Groups
Pickup groups can be configured via Web GUICall FeaturesPickup Groups.
 Click on to create a new pickup group.
 Click on to edit the pickup group.
 Click on to delete the pickup group.
Select extensions from the list on the left side to the right side.
Figure 200: Edit Pickup Group
Configure Pickup Feature Code
When picking up the call for the pickup group member, the user only needs to dial the pickup feature code.
It is not necessary to add the extension number after the pickup feature code. The pickup feature code is
configurable under Web GUICall FeaturesFeature Codes.

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English