P a g e | 416
UCM6510 IP PBX User Manual
Version 1.0.20.31
Configure a name for the Announcement group
Note: Name cannot exceed 64 characters.
Configure the group number. The group number is used in combination
with code. For example, if group number is 666, and code is 55. User
dials 55666 will send prompt 55 to all members in group 666.
Note: The group number must not conflict with any other numbers, such
as extension or conference number and cannot exceed 64 characters.
Announcements Center feature can be found under Web GUIValue-added FeaturesAnnouncements
Center. The following example demonstrates the usage of this feature.
1. Click to create new group.
2. Configure a name and number for the group.
3. Select the extensions that will be in the group.
Figure 281: Announcements Center Group Configuration
Here, Group Test's number is 666 and has extensions 1000, 1001, and 1002 as members of the group.
1. Click to create a new Announcement Center.
2. Configure the Announcement Center name and code to associate with the custom prompt.
To Next Page
Loading...
Need help?
General
