Grandstream Networks UCM6510 User Manual

P a g e | 246
UCM6510 IP PBX User Manual
Version 1.0.20.31
Skip Authentication
If enabled, the invitation from Web GUI for a conference room with
password will skip the authentication for the invited users. The default
setting is "No".
Conference Settings contains the following options:
Table 72: Conference Settings
Enable Talk detection
If enabled, the AMI will send the corresponding event when a user starts or
ends talking.
DSP Talking Threshold
The time in milliseconds of sound above what the dsp has established as
base line silence for a user before a user is considered to be talking. This
value affects several operations and should not be changed unless the
impact on call quality is fully understood, the default value is 128.
DSP Silence Threshold
The time in milliseconds of sound falling within the what the dsp has
established as base line silence before a user is considered to be silent.
This value affects several operations and should not be changed unless the
impact on call quality is fully understood, the default value is 2500.
Enable Neteq
If enabled, conference audio quality may improve, but system performance
will be lowered.
Users can check the talking Caller IDs in conference control page (UCM WebUICall
FeaturesConference). The image will move up and down when the user is talking.
Figure 139: Conference

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English