Grandstream Networks UCM6510 User Manual

P a g e | 332
UCM6510 IP PBX User Manual
Version 1.0.20.31
The following table shows the Follow Me configuration parameters.
Table 98: Follow Me Settings
Enable
Configure to enable or disable Follow Me for this user.
Skip Trunk Auth
If external number is added in the Follow Me, please make sure this
option is enabled or the “Skip Trunk Auth” option of the extension is
enabled, otherwise the external Follow Me number cannot be reached.
Music On Hold Playlist
Configure the Music On Hold playlist that the caller would hear while
tracking the user.
Confirm When Answering
By default, it is enabled, and user will be asked to press 1 to accept the
call or to press 2 to reject the call after answering a Follow Me call.
If it is disabled, the Follow Me call will be established once after the user
answers it.
Enable Destination
If enabled, the call will be routed to the default destination if no one in the
Follow Me answers the call.
Default Destination
Configure the destination if no one in the Follow Me answers the call,
available options are:
 Extension
 Voicemail
 Queues
 Ring Group
 Voicemail Group
 IVR
 External Number
Follow Me Numbers
The added numbers are listed here. Click on to arrange the
order. Click on to delete the number. Click on to add new
numbers.
New Follow Me Number
Add a new Follow Me number which could be a ‘Local Extension’ or
‘External Number’. The selected dial plan should have permissions to dial
the defined external number.
Dialing Order
Select the order in which the Follow Me destinations will be dialed to
reach the user: ring all at once or ring one after the other.
Click on “Follow Me Options” under Web GUIExtension/TrunkExtension page to enable or disable
the options listed in the following table.

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English