Grandstream Networks UCM6510 - Example Configuration for Fax-To-Email; Figure 210: Configure Inbound Rule for Fax; Figure 211: Create Fax Extension

P a g e | 324
UCM6510 IP PBX User Manual
Version 1.0.20.31
Figure 210: Configure Inbound Rule for Fax
Now the Fax configuration is done. When there is an incoming Fax calling to the PSTN number for the FXO
port, it will send the Fax to the Fax machine.
Example Configuration for Fax-To -Email
The following instructions describe a sample configuration on how to use Fax-to-Email feature on the
UCM6510.
1. Connect PSTN line to the UCM6510 FXO port.
2. Go to UCM6510 Web GUIInternal OptionsFax/T.38 page. Create a new Fax extension.
Figure 211: Create Fax Extension
3. Go to UCM6510 Web GUIExtension/TrunkAnalog Trunks page. Create a new analog trunk with
"FAX Detection" set to "No".