To Next Page

To Previous Page

P a g e | 130

UCM6510 IP PBX User Manual

Version 1.0.20.31

(1) Global Policy

This is the lowest level configuration. The global policy configured in Web GUIValue-added

FeaturesZero ConfigGlobal Policy will be applied here. Clicking on “Modify Global Policy” to

redirect to page Value-added FeaturesZero ConfigGlobal Policy.

(2) Global Templates

Select a global template to be used for the device and click on to add. Multiple global templates

can be selected, and users can arrange the priority by adjusting orders via and . All the selected

global templates will take effect. If the same option exists on multiple selected global templates, the

value in the template with higher priority will override the one in the template with lower priority. Click

on to remove the global template from the selected list.

(3) Default Model Template

Default Model Template will be applied to the devices of this model. Default model template can be

configured in model template under Web GUIValue-added FeaturesZero ConfigModel

Templates page. Please see default model template option in [Table 30: Create New Model Template].

(4) Model Templates

Select a model template to be used for the device and click on to add. Multiple global templates

can be selected, and users can arrange the priority by adjusting orders via and . All the

selected model templates will take effect. If the same option exists on multiple selected model

templates, the value in the template with higher priority will override the one in the template with lower

priority. Click on to remove the model template from the selected list.

(5) Customize Device Settings

This is the highest-level configuration in the “Advanced” settings of the device. Click on “Modify

Customize Device Settings” and following dialog will show.

Grandstream Networks UCM6510 User Manual

Other manuals for Grandstream Networks UCM6510