Grandstream Networks UCM6510 User Manual

P a g e | 147
UCM6510 IP PBX User Manual
Version 1.0.20.31
CC Max Agents
Configure the maximum number of CCSS agents which may be allocated
for this channel (when CC Mode is set to “For Trunk”). In other words, this
number serves as the maximum number of CC requests this channel is
allowed to make. Min. value is 1.
CC Max Monitors
Configure the maximum number of monitor structures which may be
created for this device (when CC Mode is set to “For Trunk”). This number
tells how many callers may request CC services for a specific device at
one time. The minimum value is 1.
Ring Simultaneously
Ring Simultaneously
Enable this option to have an external number ring simultaneously along
with the extension. If a register trunk is used for outbound, the register
number will be used to be displayed for the external number as caller ID
number.
External Number
Set the external number to be rang simultaneously. ‘-’ is the connection
character which will be ignored.
This field accepts only letters, numbers, and special characters + = * #.
Time Condition for Ring
Simultaneously
Ring the external number simultaneously along with the extension based
on this time condition.
Use callee DOD on FWD or
Ring Simultaneously
Use the DOD number when calls are being diverted/forwarded to external
destinations or when ring simultaneous is configured.
Monitor privilege control
Allow call-barging
Add members from “Available Extensions” to “Selected Extensions” so
that the selected extensions can spy on the used extension using feature
code.
Seamless transfer privilege control
Allowed to seamless transfer
Any extensions on the UCM can perform seamless transfer. When using
Pickup Incall feature, only extensions available on the “Selected
Extensions” list can perform seamless transfer to the edited extension.
Other Settings
Ring Timeout
Configure the number of seconds to ring the user before the call is
forwarded to voicemail (voicemail is enabled) or hang up (voicemail is
disabled). If not specified, the default ring timeout is 60 seconds on the
UCM6510, which can be configured in the global ring timeout setting under
Web GUIPBX SettingsGeneral Settings: General Preference. The
valid range is between 5 seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout
used is the shortest time set by either device.

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English