Grandstream Networks UCM6510 User Manual

P a g e | 152
UCM6510 IP PBX User Manual
Version 1.0.20.31
CFB Time Condition
Select time condition for Call Forward Busy. The available time conditions
are “Office Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of
Office Time or Holiday” and “Specific”.
Notes:
 “Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
 Specific Time can be configured in the Specific Time tab.
 Office Time and Holiday can be configured in System
SettingsTime SettingsOffice Time/Holiday page.
Ring Simultaneously
Ring Simultaneously
Enable this option to have an external number ring simultaneously along
with the extension. If a register trunk is used for outbound, the register
number will be used to be displayed for the external number as caller ID
number.
External Number
Set the external number to be rang simultaneously. ‘-’ is the connection
character which will be ignored.
Time Condition for Ring
Simultaneously
Ring the external number simultaneously along with the extension on the
basis of this time condition.
Other Settings
Ring Timeout
Configure the number of seconds to ring the user before the call is
forwarded to voicemail (voicemail is enabled) or hang up (voicemail is
disabled). If not specified, the default ring timeout is 60 seconds on the
UCM6510, which can be configured in the global ring timeout setting under
Web GUIPBX SettingsGeneral Settings: General Preference. The
valid range is between 5 seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout
used is the shortest time set by either device.
Auto Record
Enable automatic recording for the calls using this extension. The default
setting is disabled. The recording files can be accessed under Web
GUICDRRecording Files.
Skip Trunk Auth
 If set to “Yes”, users can skip entering the password when making
outbound calls.
 If set to “By Time”, users can skip entering the password when making
outbound calls during the selected time condition.
 If set to “No”, users will be asked to enter the password when making
outbound calls.
Time Condition for Skip
Trunk Auth
If “Skip Trunk Auth” is set to “By Time”, select a time condition during which
users can skip entering password when making outbound calls.

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English