Grandstream Networks UCM6510 User Manual

P a g e | 236
UCM6510 IP PBX User Manual
Version 1.0.20.31
When "By DID" is used, the UCM6510 will look for the destination based
on the number dialed, which could be local extensions, conference, call
queue, ring group, paging/intercom group, IVR, voicemail groups and
Fax extension as configured in "DID destination". If the dialed number
matches the DID pattern, the call will be allowed to go through.
 Dial By Name
 Callback
 Announcement
Strip
Specify the number of digits to strip from the beginning of the DID. This is
used when "By DID" is selected in "Default Destination".
Prepend
Specify the digits to be prepended before the call is placed via the trunk.
Those digits will be prepended after the dialing number is stripped.
Time Condition
Start Time
Select the start time "hour:minute" for the trunk to use the inbound rule.
End Time
Select the end time "hour:minute" for the trunk to use the inbound rule.
Frequency
Select either "By Week" or "By Month" for the time condition.
If "By Week" is selected, select the weekdays that the time condition will be
used.
If "By Month" is selected, select the months that the time condition will be
used. Next, select either "Week" or "Day".
(1) If "Week" is selected, choose the weekdays of the month that the time
condition will be used.
(2) If "Day" is selected, choose the specific days of the month that the time
condition will be used.
Destination
Select the destination for the inbound call under the defined time condition.
 Extension
 Voicemail
 Conference Room
 Call Queue
 Ring Group
 Paging/Intercom
 Voicemail Group
 Fax
 DISA
 IVR
 By DID
When "By DID" is used, the UCM6510 will look for the destination based
on the number dialed, which could be local extensions, conference, call
queue, ring group, paging/intercom group, IVR, voicemail groups and
Fax extension as configured in "DID destination". If the dialed number

Grandstream Networks UCM6510 Specifications

General

Brand	Grandstream Networks
Model	UCM6510
Category	PBX
Language	English