Grandstream Networks UCM6510 - Page 75

P a g e | 74
UCM6510 IP PBX User Manual
Version 1.0.20.31
OpenVPN®
Server Address
Configures the hostname/IP and port of the server. For example: 192.168.1.2:22
OpenVPN®
Server Protocol
Specify the protocol user, user should use the same settings as used on the
server
OpenVPN®
Device mode
Use the same setting as used on the server.
 Dev TUN: Create a routed IP tunnel.
 Dev TAP: Create an Ethernet tunnel.
OpenVPN® Use
Compression
Compress tunnel packets using the LZO algorithm on the VPN link. Do not
enable this unless it is also enabled in the server config file.
Allow Weak SSL
Ciphers
Enable/Disable allowing Weak SSL Ciphers.
OpenVPN®
Encryption
Algorithm
Specify the cryptographic cipher. Users should make sure to use the same
setting that they are using on the OpenVPN server.
OpenVPN® CA
Cert
Upload as SSL/TLS root certificate. This file will be renamed as ‘ca.crt’
automatically.
OpenVPN®
Client Cert
Upload a client certificate. This file will be renamed as ‘cliend.crt’ automatically.
OpenVPN®
Client Key
Upload a client private key. This file will be renamed as ‘client.key’ automatically.