112 HEIDENHAIN Technical Manual MANUALplus 620
Options
Software options can be enabled by entering a code number.
Display
12.1-inch TFT color flat-panel display (integrated)
Program memory
250 MB on CFR memory card
Input resolution and display step
Linear axes X axis: 0.5 µm (diameter: 1 µm)
Z, Y, U, V, W axis: 1 µm
C axis 0.001°
Block processing time
3 ms
Interpolation
Linear In 2 axes (max. ± 100 m), optional in 3 principal axes
Circle In 2 axes (radius max. 999 m), optional additional linear
interpolation in the third axis
C1/C2 axis Interpolation of X and Z linear axes with the C1/C2 axis (option)
Helix Superimpositioning of circular and straight paths
Look-ahead Precalculation of up to 5000 blocks for determining the
contouring velocity profile
Specifications MANUALplus 620
To Next Page
Loading...
