HEIDENHAIN MANUALPLUS 620 - 6.22.4 Group of NC axes

1168 HEIDENHAIN Technical Manual MANUALplus 620
6.22.4 Group of NC axes
Nominal
commands of the
PLC (Plc Nom Data)
To select the PLC Nom Data function:
 Press the Login Ipo soft key.
 Press the Axes soft key.
 Press the PlcNomData soft key.
The function displays the nominal commands of the PLC for each axis in the
following variables:
Variable Display
PlcSollStatus Axis status of the PLC as a bit line (listed in
PLC-Nom_State)
MaxAchsVorschub Maximum permissible axis feed rate in mm/s
AchsOverride Override value for each axis (1 = 100%)
TempKorr Temperature compensation in mm