HEIDENHAIN MANUALPLUS 620 - 6.13 Parallel Axes

762 HEIDENHAIN Technical Manual MANUALplus 620
6.13 Parallel Axes
In addition to the principal axes X, Y and Z you can define the parallel
secondary axes U, V and W.
The MANUALplus 620 supports various methods for treating movements of
parallel axes.
Settings in the configuration editor MP number
Axes
PhysicalAxis
[Key name of the axis]
CfgAxisPropKin
parAxComp 300205
Principal axis Parallel axis Rotary axis
XUA
YVB
ZWC
+Y
+X
+U
+V
+W
+Z
Note
Software option 94 "Parallel axis" is required to be able to use the display
function or the compensation of parallel secondary axes.