January 2012 7.11 Additional Parameters for Lathes 1393
7.11.4 C axis
List all C axes of the machine in MP_caxisKeys. The control needs this
information in order to distinguish C axes from the "C" rotary axis.
MP_caxisKeys
List of the key names of all C axes of the machine
Available from NCK software version: 597 110-01.
Format: Selection menu
Selection: Key names of all existing machine axes under PhysicalAxis.
Select the key names of the C axes and enter them here.
Default: –
Access: LEVEL3
Reaction: RESET
Enter in MP_blockBrake whether a shoe brake is present.
MP_blockBrake
Shoe brake present
Available from NCK software version: 597 110-01.
Format: Selection menu
Selection: TRUE
Shoe brake present
FALSE
Shoe brake not present
Default: FALSE
Access: LEVEL3
Reaction: RESET
Settings in the configuration editor MP number
Axes
Settings
C axis
[Key name of the C axis]
CfgCAxisProperties
blockBrake
spindlePrePosit
relatedWpSpindle
Aggregates
General
CfgAggregateKeys
caxisKeys
300801
300802
300803
600004
To Next Page
Loading...
