HEIDENHAIN MANUALPLUS 620 Technical Manual

342 HEIDENHAIN Technical Manual MANUALplus 620
4.2.3 Accessing machine parameters via MP numbers
In order to reach a certain point in the machine configuration as quickly and
directly as possible, a unique MP number has been assigned to each machine
parameter.
The MP number is shown above the object tree or the table view in the
Parameter: line. The current input value, as well as the parameter’s unit of
measure, if there is one, are shown after the MP number:
The MP number consists of a 6-digit number. The key name precedes the
6-digit MP number, and the index number (e.g. for list parameters) is
appended to the MP number. The three parts are each separated by a period.
The MP numbers are permanently assigned to a specific configuration object
or machine parameter, and can occur more than once in the system, for
example in the axis-parameter sets or in the kinematics configuration. The
prefixed key names then serve to distinguish between the numbers.
Structure of an MP number:
[Key] . xxxxxx . x
Index
MP-Nummer
Keyname

HEIDENHAIN MANUALPLUS 620 Specifications

General

Brand	HEIDENHAIN
Model	MANUALPLUS 620
Category	Control Systems
Language	English