HEIDENHAIN MANUALPLUS 620 - 7.2.2 Configuring dashboards

1292 HEIDENHAIN Technical Manual MANUALplus 620
7.2.2 Configuring dashboards
Configuring the
dashboard
 In the CfgDashboard parameter object, specify the configuration for each
defined dashboard. For each dashboard you enter the key names of up to 16
dashboard elements in the list MP_elementList.
MP_elementList
List of dashboard elements, filled from the
CfgDashboardElemnt pool.
Available from NCK software version: 597 110-01.
Format: Array [0...40]
Input: List of key names of dashboard elements configured under
CfgDashboardElemnt in the sequence of arrangement.
Default: –
Access: LEVEL3
Reaction: RUN
The dashboard elements are aligned from left to right and from top to bottom.
The index 0 defines the element at top left in the display.
Settings in the configuration editor MP number
System
DisplaySettings
CfgDashboard
[Key name of dashboard]
elementList
CfgDashboardElemnt
[Key name of the dashboard element]
dashboardpicType
attribut
entityList
CfgOemWindow
[Dashboard_1...4]
upperLeft
bottomRight
CfgGlbDispSettings
axesDisplayMode
113201
113101
113102
113103
605201
605202
604803