January 2012 1.3 NC Software 548 328-04 57
1.3.3 Description of the new functions
New software
options
You can enable the following new software options by entering a code
number. HEIDENHAIN can give you the code number after having been
informed of the SIK number:
Enhanced software
options
The features of the following MANUALplus 620 options changed with the
introduction of the new NC software version:
Additional control loops 5, 6 and 7 (options 4, 5 and 6):
It is now possible to operate up to 10 control loops (spindle and opposing
spindle, X, Z, C, Y, U, V, W axes and driven tool) in connection with a CC
6110.
Support of parallel axes U, V, W (option 94):
The auxiliary axes U and V are now supported in addition to the existing W
axis. The axes can be used for the programmable control of a traversable
opposing spindle, a mechatronic tailstock or a steady rest.
Overview of the
improvements
A summary of the improvements in NC software 548 328-04 is given below.
For more detailed information about the function in this Technical Manual,
please refer to the links indicated in the brief descriptions given below.
Option Description ID
#24 Gantry axes
Gantry axes in master-slave torque control
634 621-01
#46 Python OEM process
Python application on the MANUALplus 620
(available only for HSCI hardware)
579 650-01
#131 Spindle synchronism
Spindle synchronization
806 270-01
#132 Opposing spindle
Opposing spindle
806 275-01
To Next Page
Loading...
