HEIDENHAIN MANUALPLUS 620 - 4.7.3 Displaying;editing data records in the configuration editor

January 2012 4.7 Machine-Parameter Subfiles 387
4.7.3 Displaying/editing data records in the configuration editor
Use the SELECT DATA RECORD soft key to choose between the following views:
The following overview shows which values of an object (object1, 2, 3) are
displayed in the individual views:
basic data_1
object1(
key:= Key_A,
attribute11:= value1,
attribute12:= value2,
attribute13:= value3,
attribute14:= value4
)
basic data_3
object3(
key:= Key_C,
attribute31:= value1,
attribute32:= value2,
attribute33:= value3,
attribute34:= value4
)
basic data_2
object2(
key:= Key_B,
attribute21:= value1,
attribute22:= value2,
attribute23:= value3,
attribute24:= value4
)
subfile_1
object1(
key:= Key_A,
attribute13:= value3_T1
)
subfile_3
object3(
key:= Key_C,
attribute31:= value1_T3,
attribute34:= value4_T3
)
temp_3
object3(
key:= Key_C,
attribute31:= value1_T3,
attribute32:= value2,
attribute33:= value3,
attribute34:= value4_T3
)
temp_1
object1(
key:= Key_A,
attribute11:= value1,
attribute12:= value2,
attribute13:= value3_T1,
attribute14:= value4
)
effective_1
object1(
key:= Key_A,
attribute11:= value1,
attribute12:= value2,
attribute13:= value3_T1,
attribute14:= value4
)
effective_2
object2(
key:= Key_B,
attribute21:= value1,
attribute22:= value2,
attribute23:= value3,
attribute24:= value4
)
effective_3
object3(
key:= Key_C,
attribute31:= value1_T3,
attribute32:= value2,
attribute33:= value3,
attribute34:= value4_T3
)