HEIDENHAIN MANUALPLUS 620 - 6.22.9 Auxiliary group

1210 HEIDENHAIN Technical Manual MANUALplus 620
6.22.9 Auxiliary group
Enabling debug
outputs (Get/Set
DebugPrint)
With Get/Set DebugPrint, you define the data to be logged and saved in the
file r:\runtime\_Xprint.txt. Data you identify by a "T" will be saved.
Example of a selection:
To select the Get/Set DebugPrint function:
 Press the Login Ipo (or Login SimIpo) soft key.
 Press the Auxil soft key.
 Press the Get/Set DebugPrint soft key for the OLM to open
(Get...) the selection list (see figure below).
 Use the arrow keys to select the data whose identifiers you
want to change.
 Use the ENT key to change the identifier (T or F).