HEIDENHAIN MANUALPLUS 620 - 4.3.1 Configuration of the user parameters

366 HEIDENHAIN Technical Manual MANUALplus 620
Layout file in XML
format
You define the layout of the user parameters in layout files. These layout files
are in XML file format. The layout of the user parameters consists of a general
part prescribed by HEIDENHAIN (userparam.xml, user123.xml) and an
OEM-specific part (userparamOem.xml, user123Oem.xml). The OEM-specific
files are empty when shipped, and can be used by the OEM to display further
parameters.
XML (= extensible markup language) is a standard language for data
exchange. It uses tags, allowing for exact description of the data and the
structure. You will find a list of all XML commands supported by the control in
“XML commands for creating the layout files" on page 374.
On page 372 a simple example illustrates how you create a layout file for your
user parameters and separate help texts for the parameters.
4.3.1 Configuration of the user parameters
 CfgOemPassword
[Key name]
Define a key name for your own parameter view under MP_funcList, for
example: MP_funcList[0]: CFGEDIT-OEM.
Settings in the configuration editor MP number
System
Key code
CfgOemPassword
[Key name]
funcList
CfgModOemSoftkey
[Key name of the parameter view]
activation
skPos
buttonText
dialogRes
text
buttonImage
funcKey
helpId
CfgCfgEditActivate
[Key name of the parameter view]
layoutFile
dispLangText
106900
106901
107100
107101
107102
107103
107104
107105
107106
107200
107201
107202
System
Paths
CfgOemPath
dialogTextfile
102000
102002
Note
If you also want to grant your machine operators access to LEVEL3
machine parameters (see "Access rights" on page 347), you also have to
enter the following value under MP_funcList:
MP_funcList[1]: CONFIG-LEVEL3