January 2012 4.3 User Parameters 365
4.3 User Parameters
You can provide the machine tool operator with easy access to parameters
known as user parameters. These parameters can, for example, refer to
language settings or data evaluated by the PLC. You can display a freely
definable help text for every user parameter on the right half of the screen.
Press the HELP key to show the help text. You define the help text in a
language-sensitive *.CSV file.
Freely definable
code numbers
Press the USER PARAMETER soft key in the Organization operating mode to
view the predefined user parameters. Enter the following code numbers
(default settings) for advanced views of the user parameters:
Basic view via the USER PARAMETER soft key
Advanced view of USER PARAMETERS with possibility of setting the
conversational language: Enter code number 123
PLC PARAMETER view with grouped parameters of the PLC basic program:
Enter code number 5555.
You can assign separate soft keys to the parameters. The control displays
these soft keys on the third soft-key row level.
You can configure the code numbers for the user parameters any way you
wish (see "Definition of code numbers" on page 371).
To Next Page
Loading...
