HEIDENHAIN MANUALPLUS 620 - 4.10.4 KeySynonym

582 HEIDENHAIN Technical Manual MANUALplus 620
4.10.4 KeySynonym
Definition of synonym names
Parameter
MP number
iTNC MP number
Function and input Reaction/
Access
Page
CfgKeySynonym
Definition of a synonym name;
If parameter objects with the same content but different key names are needed, you can define a
synonym name—comparable with a link.
Examples:
 Parameter objects for the simulation channel (CH_NC)—Test Run mode of operation
 Further parameter sets for axes
[Key name = Synonym name]
Example: CH_SIM for the simulation channel
relatedTo
109501
Reference to key name
The synonym name refers to the key name
specified here.
The data of the parameter object with the key name
are used for the parameter object with the
synonym name.
Format: String
Input: Key name, max. 18 characters
RESET
LEVEL3
378
excludeList
109502
List with configuration objects to be excluded
For the config objects shown in the list, cancel the
reference at
CfgKeySynonym/relatedTo.
Format: List [0 to 50]
Input: Key names to be excluded
RESET
LEVEL3
378