HEIDENHAIN MANUALPLUS 620 - 2.6.3 Software options

122 HEIDENHAIN Technical Manual MANUALplus 620
2.6.3 Software options
Option
number
Option ID Comment
0 Additional axis 354 540-01 Additional control loops 1 to 7
1 353 904-01
2 353 905-01
3 367 867-01
4 367 868-01
5 370 291-01
6 370 292-01
8 Software option 1
Teach-in
632 226-01 Cycle programming
 Contour description with ICP
 Cycle programming
 Technology database with 9 workpiece-material/
tool-material combinations
9 Software option 2
smart.Turn
632 227-01 smart.Turn
 Contour description with ICP
 Programming with smart.Turn
 Technology database with 9 workpiece-material/
tool-material combinations
10 Software option 3
Tools and technology
632 228-01 Tools and technology
 Tool database expanded to 999 entries
 Technology database expanded to 62 workpiece-
material/tool-material combinations
 Tool life monitoring with exchange tools
11 Software option 4
Thread recutting
632 229-01 Threads
 Thread recutting
 Handwheel superimposition during thread cutting
17 Touch probe functions 632 230-01 Tool and workpiece measurement
 Determining tool-setting dimensions with a TT
tool touch probe
 Determining tool-setting dimensions with an
optical gauge
 Measuring workpieces automatically with a TS
workpiece touch probe
24 Gantry axes 634 621-xx Gantry axes in master-slave torque control