January 2012 4.10 List of Machine Parameters 583
4.10.5 Aggregates
Lathe-specific parameters
Parameter
MP number
iTNC MP number
Function and input Reaction/
Access
Page
General
CfgAggregateKeys
Definition of the existing machine components;
Enter all machine components of the lathe.
toolHolderKeys
600001
List of the tool carriers of the machine
Enter the key names of all tool carriers existing on
the machine.
Format: List [0 to 6]
Input: Selection menu with the key names
of the
tool carriers from the folder
ToolHolder
RESET
LEVEL3
1396
tailstockKeys
600002
List of the tailstocks of the machine
Enter the key names of all tailstocks existing on the
machine.
Format: List [0 to 1]
Input: String (max. 18 characters)
RESET
LEVEL3
1395
steadyRestKeys
600003
List of the steady rests of the machine
Enter the key names of all steady rests existing on
the machine.
Format: List [0 to 1]
Input: String (max. 18 characters)
RESET
LEVEL3
1395
caxisKeys
600004
List of all C axes of the machine
Enter the key names of all C axes existing on the
machine.
Format: List [0 to 2]
Input: Key names from PhysicalAxis
RESET
LEVEL3
1393
To Next Page
Loading...
