HEIDENHAIN MANUALPLUS 620 - 2.5 Component Overview of MANUALplus 620; 2.5.1 MC main computer, CFR memory card and SIK

84 HEIDENHAIN Technical Manual MANUALplus 620
2.5 Component Overview of MANUALplus 620
2.5.1 MC main computer, CFR memory card and SIK
The MANUALplus 620 always includes at least the following components:
 MC 6110T main computer
(MC = Main Computer)
and either:
 CC 61xx controller unit
(CC = Controller Computer)
 PL 620x system PL
 Modular or compact HEIDENHAIN inverter system
or
 UEC 11x controller unit with integrated inverter and PLC
MC 6110T main computer
Compact main computer for
incorporation in the operating
console, with integrated TFT flat-
panel display and operating keys.
Machine operating panel is
optional.
 Processor:
Intel Celeron M 1.0 GHz
 1 GB RAM
 HSCI interface
 Ethernet interface 100BaseT
 3 x USB 2.0
(1 in the operating panel, 2 on
the rear)
 1 x RS-232C
MC 6110T ID 731 604-xx
Additionally required:
 CFR CompactFlash memory
card
• CompactFlash memory
card, Type 1
• Contains the NC software
• 1 GB memory capacity, of
which 250 MB are for V:\
partition and 50 MB for O:\
partition. Remaining
memory is used for system
data.