January 2012 2.5 Component Overview of MANUALplus 620 85
SIK System Identification Key
• Contains the NC software
license for enabling control
loops and software options.
• The SIK number provides
the control with a unique
identification.
Main computer components ID
MC 6110T compact main computer 731 604-xx
CompactFlash memory card (CFR)
with MANUALplus 620 software
733 606-51
SIK component, 3 control loops and the "Teach-in," "smart.Turn," "Thread
recutting" and "C-axis machining" software options are enabled, see
"Software options" on page 122.
733 604-53
SIK component, 3 control loops and the "Teach-in" software option are
enabled, see "Software options" on page 122.
733 604-55
SIK component, 4 control loops and the "Teach-in" and "C-axis machining"
software options are enabled, see "Software options" on page 122.
733 604-56
Control loop expansions: ID
Enabling for:
Addition of a 4th control loop 354 540-01
Addition of a 5th control loop 353 904-01
Addition of a 6th control loop 353 905-01
Addition of a 7th control loop 367 867-01
Addition of an 8th control loop 367 868-01
Addition of a 9th control loop 370 291-01
Addition of a 10th control loop 370 292-01
To Next Page
Loading...
