January 2012 9.8 Saving and Loading Files 1789
9.8 Saving and Loading Files
The table lists all the files that can be saved to external memory devices and
loaded from them.
To write to or read from machine parameter files, compensation tables or PLC
files, you must enter the correct code numbers. For data transmission with the
TNCremoNT PC software from HEIDENHAIN the identifier of a file has no
significance. The files are saved on the PC with the same extension as on the
control.
File File extension
MANUALplus 620 cycle programs .gmz
NC program, DIN/ISO .nc, .ncs
Tool table .htt
Datum table .hzp
Machine parameters .CFG
Compensation-value table .COM
Compensation-value assignment .CMA
PLC program .PLC
PLC source code files .SRC
Text file
Pocket table .TCH
Help files
Point table
PLC error table .PET
Cutting-data table
Freely definable tables
Motor table .MOT
Motor table (servo amplifiers) .INV
Error file .log
OEM cycles
Oscilloscope recordings .SCO
To Next Page
Loading...
