HEIDENHAIN MANUALPLUS 620 - 6.1.2 Definition of axes

614 HEIDENHAIN Technical Manual MANUALplus 620
6.1.2 Definition of axes
Defining the logical
axes
Within the geometry and interpolator processing, a unique identifier (=logical
axis number) must be assigned to each axis. The identifier corresponds to the
index in MP_axisList. Logical axes are defined by sequential numbering
starting from the index [0].
The definition of the logical axes is independent of their assignment to the
machining channels.
 Enter the axes of all channels of the machine, including spindles and PLC
axes.
MP_axisList
Key names for all axes on the machine
Available from NCK software version: 597 110-01.
Format: Selection menu
Selection: List with all axes of the machine
max. 20 entries allowed
Index = logical axis number
[0]: Key name from Axes/PhysicalAxis for logical axis 0
[1]: Key name from Axes/PhysicalAxis for logical axis 1
[2]: Key name from Axes/PhysicalAxis for logical axis 2
[3]: Key name from Axes/PhysicalAxis for logical axis 3
.
.
.
[19]: Key name from Axes/PhysicalAxis for logical axis 19
Default: –
Access: LEVEL3
Reaction: RESET
Settings in the configuration editor MP number
System
CfgAxes
axisList
specCoordSysList
100001
100003
PLC operand / Description Ty p e
NN_GenChnCount
Number of configured machining channels
D