HEIDENHAIN MANUALPLUS 620 - 6.21.5 Saving and loading recordings

January 2012 6.21 Integrated Oscilloscope 1157
6.21.5 Saving and loading recordings
You can save the recorded signals and all settings in one file. The file must
have the extension SCO (oscilloscope trace file).
You can load and evaluate saved SCO files in the oscilloscope. HEIDENHAIN
also makes the PC program TNCscopeNT available for evaluating SCO files.
Saving and loading oscilloscope recordings:
Switch to the Saving and Loading mode:
 Press the soft key
To save the oscilloscope trace file:
 Press the SAVE soft key.
 Enter the path in the "Save As" dialog box.
 Press the OK soft key or button.
To load the oscilloscope trace file:
 Press the LOAD soft key.
 Enter the path in the "Open" dialog box.
 Press the OK soft key or button.