1156 HEIDENHAIN Technical Manual MANUALplus 620
Influencing the
signal display Soft keys that influence the signal display:
Shift the signal downward.
Shift the signal upward.
Decrease the vertical resolution.
Increase the vertical resolution.
Optimum vertical resolution; The signal is centered on the
zero line and always remains in the display area.
Undo vertical shifts.
Invert the signal (multiply by –1).
Second cursor
Activate/deactivate second cursor.
The information for the second cursor is relative to the first cursor. It is
shown in the status field (see "Cursor information" figure):
Code "t2: .....": Cursor position in [s], referenced to the first cursor
Code "Cu2: .....": Signal referenced to the first cursor position
Cursor information:
To Next Page
Loading...
