January 2012 4.2 The "Machine Parameters" Mode of Operation 343
Parameter groups Similar to the parameter tree-structure of the control, the MP numbers are
collected in groups:
GOTO key Press the GOTO key on the control’s operating panel to jump directly to any
MP number. If the GOTO key is pressed while in the configuration parameter,
the Go to dialog box appears:
If an MP number exists more than once in the configuration (e.g. axis
parameters), the control displays the available parameters as soon as you have
entered the entire number. You can then select the desired parameter and
jump to it by pressing the ENT key.
Machine parameters Group
100000 to 199999 System configuration + miscellaneous
200000 to 299999 Channel-dependent settings
300000 to 399999 Axis configuration
400000 to 499999 Parameter blocks
500000 to 599999 Range of parameters for TNC milling
(displayed only on HEIDENHAIN milling controls)
600000 to 699999 Range of parameters for CNC lathe machining
700000 to 799999 Range of parameters for grinding
(displayed only on HEIDENHAIN grinding controls)
800000 to 899999 Reserved
900000 to 999999 Number range for OEM parameters
To Next Page
Loading...
