HEIDENHAIN MANUALPLUS 620 - Page 114

114 HEIDENHAIN Technical Manual MANUALplus 620
Threads
 Longitudinal thread
 Transversal thread (as DIN cycle)
 Tapered thread
 API thread
 Multiple thread
 Discontinuous threads with slanted entry and exit
 Variable pitch
 Tapping
 Thread milling (possible only with C axis)
 Thread with variable pitch
Error compensation
 Linear and nonlinear axis error
 Backlash
 Hysteresis
 Reversal error during circular movements
 Thermal expansion
 Friction, stick-slip
 Friction, sliding
 Tool nose (cutting) radius
 Milling tool radius
Monitoring functions
 Amplitude of encoder signals
 Edge separation of encoder signals
 Absolute position for encoders with distance-coded
reference marks
 Following error
 Movement monitoring
 Standstill monitoring
 Nominal speed value
 Checksum of safety-related functions
 Power supply
 Buffer battery
 Operating temperature
 Running time of the PLC program
 Motor current
 Motor temperature
 Temperature of power stage
 DC-link voltage
Specifications MANUALplus 620