1180 HEIDENHAIN Technical Manual MANUALplus 620
RELEASE_
CONNECTOR
Status of axis-specific enabling (X150/X151)
BREAK_ON Request to PLC for activating the brake within 100 ms
POS_ERROR Positioning error
I2T_WARN Warning during I
2
t monitoring
I2T_ERROR Error during I
2
t monitoring
TEMP_ERROR Error during temperature monitoring
SG_REFERENCED Axis was homed (SG: safety-oriented control)
SG_POS_TESTED Axis was "tested" by the user (SG: safety-oriented
control)
SG_PREPARED Axis was homed and "tested" by the user (SG: safety-
related control)
SG_SAVE Safe axis (SG: safety-oriented control)
Variable Display
To Next Page
Loading...
