January 2012 2.6 Brief Description 119
Subfunction of the ICP C-axis machining on face and lateral surface:
Description of individual holes and hole patterns (only with
smart.Turn)
Description of figures and figure patterns for milling operations
(only with smart.Turn)
Creation of freely definable milling contours
Y-axis machining (option 70) in the XY and ZY planes (only with
smart.Turn):
Description of individual holes and hole patterns
Description of figures and figure patterns for milling operations
Creation of freely definable milling contours
Programming of the rear face for full-surface machining with the
C and Y axes
DXF import (Option 42): Import of contours for lathe and milling
operations
smart.Turn programming Program blocks (UNITS) for the complete description of a
machining block (geometry, technology and cycle data)
Dialog boxes divided into overview and detail forms
Fast navigation between the fillable forms and input groups via
the "smart" keys
Context-sensitive help graphics
Start unit with global settings
Transfer of global values from the start unit
Transfer of cutting values from technology database
Units for all turning and recessing operations for simple
contours and ICP contours
Units for boring, drilling and milling operations with the C and Y
axes for simple holes, milling contours and drilling and milling
patterns or those programmed with ICP
Special units for subroutines, section repeats and activating/
deactivating the C axis
Verification graphics for blank and finished part and for C and Y
axis contours
Turret assignment and other setup information in the
smart.Turn program
Parallel programming
Parallel simulation
User functions MANUALplus 620
To Next Page
Loading...
