HEIDENHAIN MANUALPLUS 620 - Page 1220

1220 HEIDENHAIN Technical Manual MANUALplus 620
Activating a Q trace The OLM saves the queues to be traced in a file. Define the entries in this file
as follows:
 Press the Q-Trace On-Off soft key for the OLM to open the
"trace onoff" dialog box.
 Enter the required data in the dialog box (see below).
 Conclude with OK.
"trace onoff" dialog box:
Dialog box entries:
 TraceDefNo: Enter the number of the queue (after selecting Trace, you can
view details of the queue—see above).
 On/Off: Enter 0 or 1.
Deleting trace
information
When the trace is activated, the data is "appended" to the existing trace file.
You can delete the file as follows:
 Press the Clear Saved Q soft key for the OLM to delete the
existing trace file.
All entries made after that will be entered into a new file.
Saving trace
information
Select how the Q trace is to save the trace information:
 Press the Saved Q On Compact soft key for the OLM to save
the trace information in compact form (single-line).
 Press the Saved Q On Pretty soft key for the OLM to save
the trace information in structured form.
Stopping a Q trace
 Press the Saved Q Off soft key for the OLM to stop the trace.
"Tipo Command"
soft key
The "Tipo Command" function is provided for internal tests.