January 2012 7.1 Display and Operation 1259
Current and
previous error log
file
The error log file uses two files, the current file and the previous file.
If the current file is full, the control switches the files. After converting the
current file to the previous file, the control creates a new current file.
To switch between the current and the previous error log file:
Press the PREVIOUS FILE soft key.
Press the CURRENT FILE soft key.
Filter Use a filter to limit the log file display to the following error groups:
Information
Warnings
Errors
System errors
In addition, you can select the following information:
Date and time from which you want the log file contents to be displayed.
Clients whose errors and error information are to be considered in the log
file display.
Whether the filter is taken into account depends upon the setting of the
FILTER ON/OFF soft key:
Soft key active: Filter is taken into account
Soft key not active: Filter is not taken into account
To Next Page
Loading...
