January 2012 7.1 Display and Operation 1263
Log The accumulated keystrokes are now stored simultaneously with the control
events in the log and are displayed in table view (see figure).
In order to be able to track machine operation or machine conditions
systematically, detailed additional information is entered and stored
simultaneously with all important log entries, such as keystrokes, errors,
system errors or warnings.
At least 4 weeks of control operation can be recorded with the log. The data
is saved on the SYS partition and therefore cannot be changed by the user or
OEM.
The log can be read with the programs TeleService or TNCremoNT and is part
of the service files.
To call the log from within the error system:
Press the Log soft key
Press the LOG soft key.
To Next Page
Loading...
