January 2012 7.1 Display and Operation 1265
Filter Use a filter to limit the log display to the following error groups:
Information
Warnings
Errors
System errors
In addition, you can select the following information:
Date and time from which you want the log contents to be displayed.
Clients whose errors and error information are to be considered in the log
display.
Whether the filter is taken into account depends upon the setting of the
FILTER ON/OFF soft key:
Soft key active: Filter is taken into account
Soft key not active: Filter is not taken into account
To set the filter:
Press the Filter Definition soft key
To display information:
Press the INFOS soft key
To display warnings:
Press the WARNINGS soft key
To display errors:
Press the ERRORS soft key.
To display system errors:
Press the SYSTEM ERRORS soft key.
To set the client and/or date and time:
Call the "Filter functions" dialog box
Press the FURTHER FILTER FUNCTIONS soft key
Enter the client and/or date and time
Conclude with OK.
To display the log under consideration of the new filter settings (prerequisite:
the Filter on/off soft key is on):
Press the ACTIVATE FILTER soft key.
To Next Page
Loading...
