January 2012 2.7 Software 131
SIK Information:
General Key:
The general key permits you to enable and test all new feature content level
functions and software options. The general key is valid for 90 days after the
first enabling. After these 90 days have expired, the general key can only be
used again after the software version on your control has been updated.
Press the SET GENERAL KEY soft key to open a window in which you press the
OK soft key to enable all options for a period of 90 days.
If this is done successfully, the General key has been set message appears
and the expiration date of the general key is shown in the Status field.
Pressing the EXPIRE GENERAL KEY soft key opens a window in which you press
the OK soft key to expire the general key immediately.
Be aware that it is then no longer possible to enable the general key for this
software version!
Display Meaning
Serial No. (SN): SIK number
Control Type Control model
Performance Class: Type of main computer
Features Characteristics of the SIK
SIK ok,
wrong SIK (Control Type mismatch),
wrong SIK (Features mismatch),
wrong SIK (Performance Class mismatch),
no SIK (Programming Station) or
no SIK
Status of the SIK
Display Meaning
State: NONE General key was not used yet for
this software version.
dd.mm.yyyy Date up to which all options will
be available. It is not possible to
enable them again after this
date.
EXPIRED General key has expired for this
software version. Enabling is not
possible.
To Next Page
Loading...
