HEIDENHAIN MANUALPLUS 620 - Page 1310

1310 HEIDENHAIN Technical Manual MANUALplus 620
Pop-up menu A pop-up menu is called through an OEM soft key in the vertical soft-key row
and covers the horizontal soft-key row with OEM soft-keys. This function is
interesting, for example, when you need additional space for soft keys for
more comprehensive tasks in the PLC (e.g. tool changer, pallet changer).
You can make pop-up menus with the MenuDesign program (provided in the
PLCdesignNT package).
In the *.XRS soft-key resource file, a pop-up menu is defined through the
PopupMenu=[name of the horizontal menu] entry.
The ClosePopup=“„ entry marks the end of the pop-up menu.
Constraints:
 Only horizontal pop-up menus can be made.
 No more than one pop-up menu can be active at one time.
 A pop-up menu can be ended either with a vertical soft key (ClosePopUp=“„)
or with the END soft key.
 A pop-up menu is always assigned to the operating mode from which the
menu was called.