HEIDENHAIN MANUALPLUS 620 - Page 15

January 2012 15
8.15.37 AND [ ] (A[ ])......................................................................1702
8.15.38 AND NOT [ ] (AN[ ])...........................................................1704
8.15.39 OR [ ] (O[ ])........................................................................1704
8.15.40 OR NOT [ ] (ON[ ]).............................................................1704
8.15.41 EXCLUSIVE OR [ ] (XO[ ])..................................................1704
8.15.42 EXCLUSIVE OR NOT [ ] (XON[ ]).......................................1704
8.15.43 ADDITION [ ] (+[ ]).............................................................1705
8.15.44 SUBTRACT [ ] (–[ ])............................................................1706
8.15.45 MULTIPLY [ ] (x[ ]).............................................................1706
8.15.46 DIVIDE [ ] (/[ ]) ...................................................................1706
8.15.47 REMAINDER [ ] (MOD[ ])..................................................1706
8.15.48 EQUAL TO [ ] (==[ ]) .........................................................1707
8.15.49 LESS THAN [ ] (<[ ]) ..........................................................1708
8.15.50 GREATER THAN [ ] (>[ ])...................................................1708
8.15.51 LESS THAN OR EQUAL TO [ ] (<=[ ])...............................1708
8.15.52 GREATER THAN OR EQUAL TO [ ] (>=[ ]) .......................1708
8.15.53 NOT EQUAL [ ] (<>[ ]).......................................................1708
8.15.54 SHIFT LEFT (<<) ...............................................................1709
8.15.55 SHIFT RIGHT (>>).............................................................1710
8.15.56 BIT SET (BS)......................................................................1710
8.15.57 BIT CLEAR (BC) ................................................................1711
8.15.58 BIT TEST (BT)....................................................................1712
8.15.59 PUSH DATA ONTO THE DATA STACK (PS).....................1713
8.15.60 PULL DATA FROM THE DATA STACK (PL)......................1714
8.15.61 PUSH LOGIC ACCUMULATOR ONTO THE
DATA STACK (PSL)...........................................................1714
8.15.62 PUSH WORD ACCUMULATOR ONTO THE
DATA STACK (PSW) .........................................................1715
8.15.63 PULL LOGIC ACCUMULATOR FROM THE
DATA STACK (PLL) ...........................................................1715
8.15.64 PULL WORD ACCUMULATOR FROM THE
DATA STACK (PLW)..........................................................1716
8.15.65 UNCONDITIONAL JUMP (JP)...........................................1716
8.15.66 JUMP IF LOGIC ACCUMULATOR = 1 (JPT) ....................1717
8.15.67 JUMP IF LOGIC ACCUMULATOR = 0 (JPF) ....................1718
8.15.68 CALL MODULE (CM)........................................................1718
8.15.69 CALL MODULE IF LOGIC ACCUMULATOR = 1 (CMT) ...1718
8.15.70 CALL MODULE IF LOGIC ACCUMULATOR = 0 (CMF) ...1719
8.15.71 END OF MODULE, END OF PROGRAM (EM) .................1720
8.15.72
END OF MODULE IF LOGIC ACCUMULATOR = 1 (EMT) ... 1720
8.15.73
END OF MODULE IF LOGIC ACCUMULATOR = 0 (EMF) ... 1720
8.15.74 LABEL (LBL)......................................................................1720
8.16 INDEX Register (X Register).........................................................1721
8.17 Commands for String Processing................................................1723
8.18 LOAD String (L) .............................................................................1725
8.19 ADD String (+) ...............................................................................1725
8.20 STORE String (=) ...........................................................................1725
8.21 OVERWRITE String (OVWR) ........................................................1726
8.22 EQUAL TO Command for String Processing (==) ......................1727
8.23 LESS THAN Command for String Processing (<).......................1727
8.24 GREATER THAN Command for String Processing (>)...............1727