1596 HEIDENHAIN Technical Manual MANUALplus 620
MP_alternateEditor
Alternate editor used for files starting from the size in
MP_fileSize
Available from NCK software version: 597 110-01.
Format: Selection menu
Selection: TEXT EDITOR
ASCII editor of the control
PROGRAM EDITOR
NC program editor of the control
TABLE EDITOR
Table editor of the control
Default: No value, parameter optional
Access: LEVEL3
Reaction: NOTHING
MP_softkeyIcon
Path / file name of a soft-key icon
Available from NCK software version: 597 110-01.
Format: String
Input: Max. 500 characters
The path and file name of an icon may be used instead of a text.
The icon is used for the generic soft key in the table editor if, in
addition, the parameter MP_choice (TableSettings/Columns/
CfgColumnText) is defined.
Default: No value, parameter optional
Access: LEVEL3
Reaction: NOTHING
MP_softkeyIconVariant
Number of a soft-key-icon variant
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: 0 to 100
A variant number can be entered in addition to the path and the
file name defined in MP_softkeyIcon.
Default: No value, parameter optional
Access: LEVEL3
Reaction: NOTHING
To Next Page
Loading...
