HEIDENHAIN MANUALPLUS 620 - Page 471

January 2012 4.10 List of Machine Parameters 471
choice
105704
(optional parameter)
Define a selection list for input values
A selection element consists of a value/text pair.
The text is displayed.
When selected, the value belonging to the text is
entered in the table.
The value cannot be directly edited, but only
changed using the selection.
For the associated MP_text parameter, the text
can consist of two parts separated by a comma.
This will have the following effect:
 Text in front of the comma is displayed in the
selection list
 The following part in the table editor
Format: List [2 to 30]
PLC/Pgm
run is
locked
LEVEL3
–
value
105704
(optional parameter)
Value for a selection element
A selection element consists of a value/text pair.
Here the value belonging to the text is entered.
Format: String
Input: Max. 20 characters
PLC/Pgm
run is
locked
LEVEL3
–
dialog
Text for a selection element. A selection element consists of a value/text pair.
dialogRes
105704
(optional parameter)
Name of a text
See entry under CfgColumnText/dialogText
PLC/Pgm
run is
locked
LEVEL3
–
text
105704
(optional parameter)
Language-sensitive text
See entry under CfgColumnText/dialogText
PLC/Pgm
run is
locked
LEVEL3
–
lockValue
Locked due to certain input values. If the value entered in the column corresponds to the value
specified under MP_value, the replacement text is displayed. It cannot be edited. This makes it
possible to disable editing depending on the value.
value
105705
(optional parameter)
Value for a selection element
A selection element consists of a value/text pair.
Here the value belonging to the text is entered.
Format: String
Input: Max. 20 characters
PLC/Pgm
run is
locked
LEVEL3
–
Parameter
MP number
iTNC MP number
Function and input Behavior
Access
SW vers.
Page