January 2012 6.17 Monitoring Functions 947
Switching off
monitoring
functions for
individual axes
Set PP_AxDeactivateMonitoring to switch off monitoring for individual axes.
The following table shows the status of monitoring as a function of the
axis-specific PLC operand PP_AxDeactivateMonitoring and drive enabling
(I32) if MP_I32stopsMonitoring =On.
PLC operand / Description Ty p e
PP_AxDeactivateMonitoring
Deactivate monitoring functions
0: Monitoring functions active
1: Monitoring functions inactive
M
Monitoring functions
for
PP_AxDeactivate
Monitoring =
MP_I32stopsMonitoring
=On;
I32=
Individual
drive
motor
All drive
motors
Inactive Inactive 0 0
Active Active 0 1
Active Inactive 1 0
Inactive Active 1 1
To Next Page
Loading...
