HEIDENHAIN MANUALPLUS 620 - Page 970

970 HEIDENHAIN Technical Manual MANUALplus 620
Machine
parameters
MP_motFactorI2t
Reference value for I
2
t monitoring of motor
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: 0.000 000 000 to 1000 [· rated or stall current of the motor]
Default: 0
Access: LEVEL3
Reaction: RESET
MP_ampFactorI2t
Reference value for I
2
t monitoring of the power module
Available from NCK software version: 597 110-01.
Format: Numerical value
Input: 0.000 000 000 to 1000 [· rated current of power module]
0: I
2
t monitoring of the power module switched off
1: Rated current of power module is reference value
Default: 0
Access: LEVEL3
Reaction: RESET