January 2012 2.5 Component Overview of MANUALplus 620 99
Key assignments HR 410 handwheel *):
Without detent: Without detent: Without detent:
ID 296 469-55 ID 296 469-54 ID 296 469-53
With detent: With detent:
ID 535 220-05 ID 535 220-03
(for PLC basic program) (special assignment) (standard)
*) For a list of the keys available for exchanging, see "Key symbols" on page 101.
HR 130 handwheel
Panel-mounted handwheel
ID 540 940-01HR 130 handwheel with detent,
with ergonomic control knob, radial cable outlet
ID 540 940-03HR 130 handwheel without
detent, with ergonomic control knob, radial cable
outlet
HR 180 panel-mounted handwheel for
connection to a position input.
ID 540 940-08 Handwheel with mechanical
detent (100 stops per
handwheel revolution), with
ergonomic knob.
Output signal: 1 V
PP
To Next Page
Loading...
